|
Product Introduction
9603 | 
| l High strength, low viscosity, good oil solubility, slightly oily and inert surfaces. l Typical application: Assembly of new shaft sleeves, bearings, small motor rotor shafts, bushings, etc. | 9609 | l General purpose, high strength, low viscosity, fast curing, for transition or clearance fits. l Repair worn bore-shaft fits or out-of-tolerance parts. l Typical application: Assembly of holding keys with shafts, bearings, small motor rotor shafts, bushings, etc. | 9620 | 
| l High temperature resistance (204°C), high strength, high viscosity, no flow. l Typical application: Used for retaining of hole-sleeve fittings for intermittent work, etc, under high temperature conditions of 150~204°C. | 9638 | l Ultra-high strength, high viscosity, can retain shaft-hole with large clearance. l For bonding cylindrical mating parts, fast curing. l Typical application: The highest intensity working condition in case of dynamic or periodic loading. | 9648 | l High strength, low viscosity, fast curing, filling gap <0.15mm. l Typical application: Occasions of small fit gap, high continuous working temperature, and fast fixing. | 9680 | 
| l High strength, medium viscosity, suitable for clearance fit or interference fit, can replace press fit. l Used for bonding cylindrical fittings, repairing hole-shaft fittings and out-of-tolerance parts. l Typical application: Assembling, retaining bearings, bushings, pulleys, gears, rotors. |
Model | 9603 | 9609 | 9620 | 9638 | 9648 | 9680 | Color | Green | Green | Green | Green | Green | Green | Max bonging gap (mm) | 0.13 | 0.13 | 0.25 | 0.25 | 0.15 | 0.25 | Viscosity (mPa.s) | 125 | 125 | 5000-12000 | 2000-3500 | 400-800 | 750-1750 | Shear strength (Mpa) | ≥15 | ≥15 | ≥15 | ≥15 | ≥15 | ≥15 | Operating temp. (℃) | -55~150 | -55~150 | -55~204 | -55~150 | -55~150 | -55~150 | Curing rate (fixture/full cure,25℃) | 10min/24h | 10min/24h | 20min/24h | 10min/24h | 10min/24h | 10min/24h |
|
|
